What to Do When Your Water Heater Suddenly Stops Working: Advice
What to Do When Your Water Heater Suddenly Stops Working: Advice
Blog Article
Have you been trying to locate answers about How to Troubleshoot and Repair an Electric Water Heater?
Numerous modern homes use an electrical hot water heater for their heating system, due to its ease and also simplicity of use. Nevertheless, just like any other electric appliances, problems might occur with its usage, unexpectedly. It can be actually discouraging to get up to a cold shower as opposed to a warm one or having your bath with water that isn't hot adequate and even too warm. Whatever the situation may be, hot water heater troubles can be fairly aggravating. Luckily, we have actually made a list of possible remedies to your water heater concerns. There are a number of elements that could trigger a number of these problems, maybe an issue with the power supply, the electric heating element, or the thermostat. Prior to doing anything, ensure you turn off the primary power supply for safety. Whatever the trouble is, getting it repaired need to not position way too much of a concern if you comply with these steps:
Call A Professional:
If after changing all malfunctioning parts and also resetting your temperature level, the water heater still isn't functioning, you may require to call a professional plumber for a professional point of view. The issue with your heater could be that the cold and hot taps have actually been changed or it might be undersized for the quantity of hot water required in your home. Whatever the instance may be, an expert plumber would assist address the issue.
Examine Your Power Supply:
As standard as this may appear, it is very needed. Without sufficient power, your hot water heater will not operate. So the first thing to do when your water all of a sudden retires is to confirm that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the problem, simply turn it off and on once more. Change any kind of broken or worn-out fuse. Test the device with power after these changes to see if it's now functioning.
Examine Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't warm sufficient, you may need to check the temperature setups on your upper thermostat. Make sure the circuit breaker is turned off prior to doing anything. Open up the accessibility panel and also press the red button for temperature reset above the thermostat. This need to help warm the water. Turn the circuit breaker back on as well as check if the issue has been resolved.
Check the Heating Element in the Hot Water Heater:
If it's not a power trouble, then try looking into your heating element if it is still working. Evaluate each of your heating elements to make sure the problem isn't with any of them. If any of them is damaged, change that component and afterwards examine whether the hot water is back on.
Verdict
Hot water heater troubles are not constantly significant. A lot of them are because of small problems like a blown fuse or worn-out burner. Changing the damaged components must suffice. Nevertheless, if you are still not able to resolve the problem, give a call to your nearest plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed our topic about Hot Water Heater Repair. Thanks so much for taking time to read our piece of content. Those who appreciated our blog post kindly remember to share it. Thanks a lot for your time invested reading it.
Fast solution? Ring! Report this page